This
DC motor controller circuit using a 741 operational amplifier operating
as a voltage follower where its non inverting input is connected to the
speed and rotation direction of a potentiometer VR1. When VR1 is at mid
position, the op-amp output is near zero and both Q1 and Q2 is OFF.
When VR1 is turned towards the positive supply side, the output will go positive voltage and Q1 will supply the current to the motor and Q2 will be OFF. When VR1 is turned to the negative supply side, the op-amp output switches to the negative voltage and Q1 will turn OFF and Q2 ON which reverses the rotation of the motor's direction.
When VR1 is turned towards the positive supply side, the output will go positive voltage and Q1 will supply the current to the motor and Q2 will be OFF. When VR1 is turned to the negative supply side, the op-amp output switches to the negative voltage and Q1 will turn OFF and Q2 ON which reverses the rotation of the motor's direction.
As
the potentiometer VR1 is moved toward either end, the speed increases
in whichever direction it is turning. The TIP3055 Q1 NPN power
transistor has a collector current specs of 15A and VCE0 of 60V DC. The
MJE34 Q2 PNP power transistor has a collector current specs of 10A and
VCE0 of 40V DC.
Tidak ada komentar:
Posting Komentar